Grooved anchor wires have always been reliable wires in the electrical manufacturing industry. The use of grooved anchor wires is unlikely to decrease in the future, and most electrical product manufacturing companies find that copper is easy to use. In the wiring projects of buildings, grooved anchor wires are reliable. They have excellent electrical conductors and good thermal conductivity. They won't burn even when overloaded, so they are very useful for machines with heavy circuits. In electrical equipment, winding wires play a very important role because they are compared to equipment. Therefore, winding wires or magnetic wires must be selected to reduce the volume and weight of electrical equipment and improve its service life and reliability. The development of synthetic chemistry has led to the emergence of new insulating materials, resulting in a very wide variety of enameled wires with improved performance. However, in the current situation, this has caused confusion in product selection.  

Since the flat coil has a lower resistance under the same size conditions, and the manufacturing materials do not contain lead, it complies with the ROHS directive. These properties determine that it can replace the previous generation of circular grooved anchor coils and become a universal product for power supplies, PCs and other small handheld electronic devices such as iPads. Product optimization design - superior heat dissipation performance allows higher indicators to be set when the magnetic core is working, reducing consumables, the size of the magnetic core can be smaller, and the number of winding turns can be less. The reason is that thanks to the advantages of flat coils, flat coils can replace circular grooved anchor coils and are widely used. Flat coil inductors are called high-current inductors because under the same size, circular wire inductors cannot reach the set current value that meets the requirements, so flat coils came into being.Because the insulation and conductor share the tensile load, these flat wires have higher strength. You can use flat wires for various purposes because these wires are easy to bend and you don't have to face the common installation or fastening problems of circular cables. Flat grooved anchor wires are made from circular inlets and can be used for multi-slider forming, high-speed stamping and transformer windings. Before using these flat wires, these flat wires become harder through continuous heating and cooling, which is why they are suitable for all types of applications. Polyvinyl chloride wire and cable have high tensile strength, they are also flexible and versatile, have strong conductivity, and are widely used in motor manufacturing applications.When you choose flat grooved anchor wires, you can also save space. Due to its shape, it requires much less space than circular copper cables. The flat wire structure has mechanical strength, so large conductors are not needed to enhance its strength. The cross-section of these grooved anchor wires can be reduced to the extent required to carry the current load. The space factor of flat enameled wires is superior to other wires for windings, as well as their excellent electrical properties, such as heat resistance, solvent resistance, chemical resistance, and resistance to hydrolytic degradation of varnish, and stability when combined with insulating materials. Recently, there is a trend to use automatic winding machines to wind the coils directly onto the motor rotor or stator. Generally speaking, there are many factors that make the wire easy to bend and stretch. Before use, it must be carefully considered and checked whether the enameled wire winding process will damage or reduce the size.