How to distinguish the thickness of flat copper wire flat cable? Let's learn about groove anchor line manufacturers together!

1、 According to the position and style of the reinforcement plate and gold finger of FFC flat cable:

It can be divided into A type, B type, C type, D type, E type, F type, and G type. The different models of FFC flat ribbon cables are mainly based on the relative positions of the reinforcing plates at both ends of the FFC ribbon cables and the wire ports, as well as the style presented by the copper wires at the wire ports.

2、 According to the spacing classification of FFC flat cable:

The distance between the centerlines of any two adjacent copper wires in an FFC ribbon cable is called the "FFC ribbon cable spacing". Based on the spacing, FFC flat ribbon cables in the industry can be divided into 0.5mm, 1.0mm, 1.25mm, 1.27mm, 2.0mm, 2.54mm, etc. The width of copper wires in ffc flat cables with different spacing is different. Generally, the wider the spacing between cables, the larger the spacing between cables. The spacing between ffc cables is positively correlated with the width of the ffc cable conductor. Our website (www.kem-ffc. com) has a very clear explanation of this issue in the ffc cable conductor specifications.

3、 Classified by FFC flat cable thickness:

FFC flat ribbon cable is made by pressing two layers of hot melt adhesive film on top and one layer of tin plated flat copper wire under a high-temperature wheel. According to the thickness of the flexible flexible ribbon cable, it can be classified into 0.12mm, 0.136mm, 0.138mm, 0.155mm, 0.17mm, 0.21mm, 0.22mm, 0.26mm, 0.3mm, etc. This thickness classification refers to the total thickness of the upper and lower layers of adhesive film and the middle copper wire. By combining these three, various thicknesses of FFC flexible cable can be differentiated. However, it should be noted that thick copper wire is generally paired with thick adhesive film, because the copper wire of FFC flat cable can only be embedded in the adhesive layer of the adhesive film, so that the pattern of the pressed FFC flexible cable can be clear and the adhesion can meet the standard. The above is the summary provided by the groove anchor wire manufacturer on how to distinguish the thickness of flat copper wire flat cables.